As everybody knows, casting
-machine.html' target='_blank'>gravity casting requirement is very strict, in the process of the use of gravity casting machine
is a safe hidden trouble, so in the use of gravity casting machine we will be very careful.
But do you know?
Even without using the gravity casting machine, just clear the gravity casting machine also should pay attention to the following.
Clean up the gravity casting machine workers must complete personal protective, be familiar with all kinds of safety operation procedures.
Is taken from the casting pile casting, want to take a top-down, avoid casting cuts, flipping to enable the crane and major castings in enabling gravity casting machine, to prevent the sling or casting pressure hand, don't load lifting, sling don't hang on the castings poured riser.
Should pay attention to when using pneumatic shovel, pneumatic shovel to be on the edge of the casting to start again, don't start to casting side first.
When use, don't cutting to the people, in order to avoid flying debris.
Stop, want to close the duct valves, stop to pneumatic shovel gas supply.
To prevent residual in deoxidization adhering sand and casting flash, burr, poured riser on the cut of a man's hand and fly sand damage to the eyes.
Nanjing BoQiao Machinery Co., Ltd. as one who also teaches operations about how we use our whole operating system as a way to gain advantage and create considerable value and capture value in a sector where, in essence, the environment is quite hostile from a competitive point of view.
At the heart of casting machinery is our Vision to be the global energy company most admired for its people, partnership and performance.
Nanjing BoQiao Machinery Co., Ltd. integrates research streams on team diversity and knowledge boundaries, and present a framework that considers the kinds of specific knowledge boundaries that must be spanned to achieve high-level, cross-boundary teaming.
Obviously, financial return is important in manufacturing molding machine, but I think that's not enough. I think many customers want to support something they really believe in.